Search
  • In-Pipe Technology

Lift Station Odor Control System - The Basics


What is a Lift Station Odor Control System?

A wastewater lift station odor control system is an equipment that pumps wastewater from one elevation to another. So essentially, a lift station odor control system is a pumping station that moves wastewater from a lower elevation to a higher elevation, which saves money on excavation involving digging for pipes.


Digging trenches can be costly because the sewer pipes are underground. The installation of a wastewater lift station odor control system at specific points in a gravity pipe system reduces construction costs and does not compromise functionality or efficiency. They are essential in the movement of sewage to a wastewater plant.



What are the Benefits of a Lift Station Odor Control System?

An integral part of a successful sewage collection system is a lift station odor control system. To keep costs low, raw sewage travels underground via sloped pipelines that uses gravity. This type of pipe is also known as a gravity-pipe. Sometimes, wastewater must enter the pipe system at a lower elevation.


To allow raw sewage to travel to a wastewater treatment facility, it must be transported efficiently to a higher elevation. This cannot happen naturally, for obvious reasons, as it would defy gravity and physics. Therefore a wastewater lift station odor control system

is necessary to assist.


The raw sewage eventually reaches a storage container called a "wet well," which is basically a holding tank that eventually reaches a predetermined level. The waste is then monitored and tested to determine if there are any sewage levels. At this stage, any solid (or coarse) material is removed.


After the wet well has been filled, a lift station odor control system pump will "lift up" the sewage using a pressurized sewer force main. A sewer force main is made up of pumps and compressors. Its function is to raise the wastewater to a higher level so it can continue its journey towards treatment plant or recirculation.



Lift Station Odor Control System Maintenance

Sewage can be dangerous and must be treated accordingly. Regular maintenance is a must for wastewater operators. It is not only best practice to keep a maintenance log, but it is often required by law. Maintenance includes cleaning and monitoring flow readings and greasing motors for a properly functioning lift station odor control system.


This also includes testing power supplies and backup generators. It is important to test lift station odor control system alarms so that the appropriate parties can be notified immediately in the event of any equipment or operational problems.



For specific questions about lift station odor control system processes and best practices, or how In-Pipe Technology can best assist with any issues that may be occurring, you can reach out to us directly: 630.509.2488


29 views0 comments