What Gets Rid of FOG? An In-Depth Guide to Fats, Oils, and Grease Control
- In-Pipe Technology
- Aug 22
- 3 min read
Asking the Critical Question—What Gets Rid of FOG?
Municipalities and industrial clients alike are constantly asking: what gets rid of FOG effectively and sustainably? FOG—fats, oils, and grease—remains one of the most pressing problems in modern wastewater management.
Left unchecked, FOG clogs sewer lines, damages infrastructure, and leads to costly sanitary sewer overflows (SSOs). Addressing what gets rid of FOG requires a scientific, preventative, and eco-friendly approach—exactly where In-Pipe Technology provides unmatched solutions.
Understanding FOG: Why “What Gets Rid of FOG” Matters
Before solving the problem, it’s critical to define why the question—what gets rid of FOG—is so important. FOG enters wastewater systems through kitchens, food processing plants, and industrial facilities. When cooled, it solidifies, sticking to sewer walls and reducing flow capacity.
Over time, this buildup leads to expensive blockages and even system-wide failures. For municipalities managing millions of gallons of wastewater daily, knowing what gets rid of FOG efficiently can mean the difference between smooth operations and financial strain.
The Traditional Answer to “What Gets Rid of FOG”
Historically, when communities asked what gets rid of FOG, the response was mechanical or chemical interventions:
Grease traps and interceptors: Installed at commercial kitchens to capture grease before it enters the system.
Chemical degreasers: Break down grease but often harm the environment and accelerate infrastructure corrosion.
Manual cleaning and jetting: Labor-intensive and expensive, requiring ongoing maintenance without solving the root cause.
While these methods provide short-term relief, they don’t fully answer the question of what gets rid of FOG in a long-term, cost-effective, and eco-conscious way.
A Smarter Approach: What Gets Rid of FOG with In-Pipe Technology
The real answer to what gets rid of FOG comes from prevention at the microbial level. In-Pipe Technology introduces tailored, naturally occurring bacteria directly into the wastewater collection system. These microbes actively digest fats, oils, and grease before they accumulate, making them one of the most effective solutions to what gets rid of FOG sustainably.
How It Works:
Continuous dosing: Microbes are introduced where FOG typically enters the system.
Biological breakdown: Instead of letting FOG solidify, bacteria metabolize it into harmless byproducts like water and carbon dioxide.
Odor reduction: Along with solving what gets rid of FOG, the microbial process reduces hydrogen sulfide, eliminating foul sewer odors.
Asset protection: Extending the life of collection systems and reducing costly rehabilitation.
With this innovative strategy, In-Pipe provides the best answer to what gets rid of FOG while lowering long-term operational costs.
Why Municipalities Must Care About What Gets Rid of FOG
When municipalities ignore what gets rid of FOG, the consequences are significant:
Increased risk of sanitary sewer overflows (SSOs), leading to EPA fines and compliance issues.
Accelerated infrastructure deterioration, costing millions in repairs and replacements.
Negative public perception due to odors, backups, and environmental pollution.
By proactively investing in solutions that truly address what gets rid of FOG, municipalities protect both their infrastructure and their communities.
Comparing Solutions: What Gets Rid of FOG the Best?
When evaluating what gets rid of FOG, municipalities and industrial clients must weigh effectiveness, sustainability, and cost:
Approach | Short-Term Effectiveness | Long-Term Impact | Environmental Impact | Cost Efficiency |
Mechanical cleaning | High | Low | Neutral | Expensive |
Chemical degreasers | Medium | Low | Negative | Moderate |
Microbial treatment (In-Pipe) | High | High | Positive | Cost-effective |
Clearly, the biological approach offers the best overall answer to what gets rid of FOG.
The Future of Wastewater Management: Redefining What Gets Rid of FOG
As cities grow and industrial output increases, the challenge of what gets rid of FOG will only intensify. Traditional methods will continue to fall short, but microbial technology positions municipalities for sustainable success. In-Pipe Technology’s approach not only solves what gets rid of FOG but also aligns with modern goals of reducing carbon footprints, promoting green practices, and lowering lifecycle costs.
In-Pipe Technology Is the Clear Answer to What Gets Rid of FOG
So, what gets rid of FOG? The most effective, eco-friendly, and cost-conscious answer is microbial treatment powered by In-Pipe Technology. By preventing buildup at the source, In-Pipe offers municipalities and industrial clients a proven path to cleaner systems, fewer SSOs, and long-term infrastructure resilience.
If your community or facility is asking what gets rid of FOG, it’s time to connect with In-Pipe Technology. The future of wastewater management starts with prevention—and In-Pipe is leading the way.
Comments