What Gets Rid of FOG? In-Pipe Technology’s Proven Approach to Wastewater Challenges
- In-Pipe Technology
- May 16
- 3 min read
Fats, oils, and grease (FOG) are some of the most persistent and problematic pollutants in wastewater systems. They build up silently in pipes, narrow flow paths, cause sewer blockages, and lead to costly sanitary sewer overflows (SSOs). For municipalities and industrial clients alike, the key question is: what gets rid of FOG—not just temporarily, but for good?
This article explores what gets rid of FOG, the science behind FOG formation, and how In-Pipe Technology offers the most innovative and sustainable solutions available in the wastewater industry.
Understanding the FOG Problem
Before answering what gets rid of FOG, it's important to understand what FOG actually is and how it causes damage:
Fats: Derived from animal-based cooking and food processing
Oils: Includes plant-based oils used in kitchens and industrial food production
Grease: Often a combination of fats and oils mixed with soaps, detergents, and other waste
FOG enters the wastewater stream through residential sinks, restaurant drains, food processors, and even industrial facilities. Over time, it cools and solidifies in sewer lines, binding with other debris to form large blockages—commonly referred to as "fatbergs."
These blockages can lead to:
Increased operational costs
Frequent emergency callouts
Sewer backups and environmental violations
The issue is clear—but the critical question remains: what gets rid of FOG efficiently and long-term?
What Gets Rid of FOG? A Breakdown of Common Methods
1. Grease Traps and Interceptors
Used widely in food service establishments, grease traps intercept FOG before it enters the public sewer. While they help minimize the load, they don’t fully answer what gets rid of FOG in the entire sewer system.
2. High-Pressure Jetting and Manual Cleaning
Municipalities often rely on mechanical cleaning to remove FOG buildup. This reactive approach is expensive, labor-intensive, and temporary. It addresses symptoms, not the source—so it doesn't fully answer what gets rid of FOG for the long term.
3. Chemical Treatments
Some systems use emulsifiers and degreasers to dissolve FOG, but these chemicals often just push the problem downstream and may introduce environmental hazards. Again, not a sustainable solution when asking what gets rid of FOG safely and effectively.
So, What Gets Rid of FOG? In-Pipe Technology Has the Answer
In-Pipe Technology has developed a proactive, science-driven approach that redefines what gets rid of FOG. Their patented microbial solution treats wastewater at the source—within the sewer collection system itself—offering prevention, not just cleanup.
Microbial Bioaugmentation: A Natural Solution
So what gets rid of FOG effectively? In-Pipe introduces specialized, non-pathogenic bacteria into the sewer network. These bacteria feed on organic waste, including fats, oils, and grease, breaking it down naturally before it can accumulate and harden.
Benefits of In-Pipe’s microbial approach include:
Prevents buildup in pipelines and lift stations
Reduces the need for jetting and chemical treatment
Improves flow and reduces system maintenance
Minimizes odors caused by decaying FOG
In this case, what gets rid of FOG is biology—smart, sustainable, and always working.
Upstream Treatment for Downstream Success
Traditional methods wait for wastewater to arrive at the plant. In-Pipe Technology treats the system upstream, reducing FOG, BOD, and odor before water reaches the treatment facility.
This not only answers what gets rid of FOG, but also improves overall system health and efficiency, leading to:
Lower energy usage at treatment plants
Fewer blockages and emergency service calls
Extended life of infrastructure
Environmentally Friendly and Cost-Effective
If you're asking what gets rid of FOG without harming the environment, In-Pipe is the answer. Unlike chemical solutions, their microbial treatments are natural, non-toxic, and don’t generate harmful byproducts.
Clients who adopt In-Pipe Technology see:
Significant reduction in grease-related clogs
Long-term savings on maintenance and labor
Improved compliance with environmental regulations
In short, when evaluating what gets rid of FOG, In-Pipe Technology provides a solution that is safe, sustainable, and scalable.
Why In-Pipe Technology Is the Obvious Choice
Still wondering what gets rid of FOG better than traditional methods? Here's what sets In-Pipe apart:
✅ Proactive FOG prevention
✅ Science-backed microbial treatment
✅ Low-maintenance, high-impact system integration
✅ Improved plant efficiency and reduced operational costs
✅ Supports environmental goals and regulatory compliance
For municipalities and industrial operations, In-Pipe offers a clear path forward—one that answers what gets rid of FOG completely and consistently.
Final Thoughts on What Gets Rid of FOG
So, what gets rid of FOG in a way that’s smart, sustainable, and cost-effective? In-Pipe Technology's microbial bioaugmentation solution provides a scientifically proven answer. By treating FOG before it becomes a problem, In-Pipe helps wastewater systems run cleaner, safer, and more efficiently.
If you’re ready to eliminate FOG-related headaches, improve flow, and reduce maintenance costs, In-Pipe Technology is the partner you’ve been looking for.
👉 Learn more about what gets rid of FOG at www.in-pipe.com
Commentaires